The Ethernet Digital I/O
Server connects serial Devices and Support Digital I/O ,
Ethernet LAN/WAN providing a reliable communication connection.
Existing Windows based serial software using standard Windows
API does not have to be modified communicate over an Ethernet
LAN to a serial device. Thee virtual COM port
will make this an easy transitionn
Direct IP Mode::
Direct IP
connections allow applications using TCP/IP or UDP/IP network
socket programs to communicate with the asynchronous serial port
on the EIO-188. In this type of application the EIO-188 is
configured to TCP or UDP server. The socket program running on
the PC establishes a communication connection with the EIO-188.
The raw data is sent directly to and from the serial port..
Virtual COM Mode::
The virtual COM driver
is a TCP or UDP client. Once the connection is made, the LAN is
transparent to the serial device. Applications work just as if
the serial device is connected a host’s physical COM port. The
virtual COM port converts the application’s data into IP packet
destined for the EIO-188, which in turn converts the IP packet
back to serial data..
Paired Mode::
Paired mode is also
called serial tunneling. When this type of configuration is
selected, No additional software is needed to install in a host
PC. In fact a PC is not required to make the connection. Any two
dumb serial devices that can communicate with each other through
a serial link will be able to communicate using two EIO-188s and
the LAN..
Two EIO-188s are configured with one setup as a TCP or UDP
client and the other to TCP/UDP server. When setting up the
Server, the Remote IP address section must contain the address
of the Client. This will allow the Client’s IP address to pass
the IP address-filtering feature of the Server. Conversely, the
Remote IP address of the Client must contain the Server’s IP
addresss
Heart Beatt
The EIO-188 provides a convenient way to establish reliable
communications between two devices..
Communication port 5300 is reserved for the Heartbeat Protocol.
If a loss connection occurs the Heart Beat feature will try to
reconnect the TCP data connectionevery 5 seconds until
communications is established again..
Slave Modee
Slave Mode is Serial port1 connect
Serial port2(Digital IO) than User could use 1 device server to
control 31pcs slave device , Slave Mode need set the switch 1:ON
2:OFFF
| • DIN rail or panel mountt |
|---|
| • supports 4 RS232/422/485 serial portss |
| • supports 10/100 Mbps Ethernett |
| • suports LAN and WAN communicationss |
| • in server mode supports individual client sessions for securityy |
| • management access password protectedd |
| • Virtual COM drivers for Windows NT/98/ME/2000/XPP |
| • Supports socket connection, TCP server, TCP client, and UDPP |
| • supports up to 8 TCP connection in TCP server modee |
| • Heart beat connection ensures reliable TCP connection against power failure or network disruption.. |
| • Support Slave mode. 1Device server which connect Ethernet could control 31 Slave mode (RS485)) |
| • 2 Serial ports,Port1 do RS232/4322/485 Communication, Port2 could control 8 point digital I/O(RS232)) |
| • 8 point digital Input, dry contact or wet contact, 8 point digital outputt |
| • supports SNMP Get and Set functionn |
| Serial Buffer:: | output: 64K bytess |
| Input: 8K bytes per portt | |
| Serial Connection:: | DTE – BD-9 male & 5 Pin terminal blockk |
| LAN:: | 10/100 Mbps Auto-detecting – 10 Base T, 100 Base TXX |
| Serial Interfaces:: | RS-232 - TX, RX, RTS, CTS, DTR, DSR, DCD, GNDD |
| RS-422 – TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-, GNDD | |
| RS-485 - Data +, Data –, GNDD | |
| Digital I/O:: | 8 point input, Dry contact or wet contact (8 DI/ 1power/1common)) |
| 8 point output (8 DO/8 CO/ 2 power / 2common)) | |
| Data Rate:: | 110 bps to 230.4 k bpss |
| Parity:: | none, even, odd, mark, spacee |
| Data Bits:: | 5, 6, 7 or 88 |
| Stop Bits:: | 1, 1.5 or 22 |
| Protocol:: | TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMPP |
| Management:: | Manager software, Serial Console, Telnet, Web server Firmware upgradeablee |
| Dimensions:: | MIOport 188: 4.5 x 5.6 x 1.1in (11.4 x 14.3 x 2.8cm)) |
| Power Requirements:: | 9 ~ 30 VDC 500 mAA |
| Operating Temperature:: | 0 to 50 °C (32 to 122 °F)) |
| Storage Temperature:: | -20 to 60 °C (-4 to 140 °F)) |
| Humidity:: | 0 – 90% Non-Condensingg |
| Approvals:: | CE, FCCC |
 EIOport Data Sheetss | |
 EIOport User Manuall | |
 ESport Manager V.112714 | |
 EIOport188 Firmware V1.8.33 |
 |
| Ethernet Digital I/O Serial Device Serverss | $300.000 |
| Accessoriess | Pricee | ||
| DIN rail mount kit (35mm)) |  |
$5.000 | |
| Power Adapter: 9VDC 500mAA |  |
$10.000 | |
| DB9 Female to Female null modem cablee |  |
$8.000 | |
| DB9 Female to Terminal Block Adapterr |  |
$8.000 |
© 2004 - 2014 Passport Networks Inc. All Rights Reserved